CNC Dust Extraction for Routers and Precision Woodworking Machines

Table saws need correctly sized ducting and dust filtration to keep your workshop clean,safe and compliant

The advanced machinery used in Joineries and Kitchen manufacturing sites produce enormous volumes of dust that need collecting by bag or Rotary Valve and bin.

Banned in Europe for H&S non-compliance, these portable machines are inadequate and emit fine dust within weeks of use., the undersized

CNC routers, panel saws, table saws, and wood planers all share the same problem: they generate high volumes of fine timber dust that standard extraction systems are not built to handle. A correctly specified CNC dust collection system is different in scale and filtration to anything else on the workshop floor.

Why CNC and Precision Machining Extraction Is A Category of Its Own

A CNC router fitted with a 200–250mm extraction point needs to move 4,000–6,000m³ of air per hour at 30–35m/sec. In many cases, that is more extraction capacity than the rest of the factory combined.

 Table saws and panel saws cutting MDF and engineered board produce an equally fine particulate that migrates across the workshop if the system is not sized for the cut volume.

MDF dust is a respiratory hazard that should not be underestimated. Getting the dust collector for your CNC machine or timber machining equipment right is not optional.

The Filter Problem that Comes With The Machine

Basic filters are commonly included with new CNC router purchases as a bundled incentive. In practice, they are undersized for the dust volumes a CNC produces.

Boards come off the bed still coated in fine dust, often cleaned with expensive compressed air that puts the particulate straight back into the air your team is breathing.

The same issue affects table saw dust collection and panel saw dust extraction setups that have not been sized for actual cut throughput. An undersized system does not just create a dirty workshop—it creates a health risk and increases your cleaning costs.

Getting The System Right

We have extensive experience quoting CNC dust extraction systems and precision timber machining setups sized correctly for the equipment. A well-specified system gives you a clean workshop, a better finished product, and lower ongoing costs.

 Whether you need:

• A dust collector for a CNC router
• Table saw dust extraction
• A router table dust collector

The starting point is matching the extraction system to the actual air volume your machinery requires. With thi information, our expert Technical Sales Managers will be able to advise the correct filter area for your dust extraction solution so you dont have to replace blocked filter socks every year! The cheapest quote offered to you will never be the best value dust extraction solution.

 Learn more about our dust extraction systems.